MULTIPLE ORIFICE, RADIAL PATTERN, SHORT LENGTH, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 79010-012. To specify angles not listed, use the basic part number shown, replacing the "D" digits for the included angles desired. Following this, add a dash and the orifice size. The basic number gives both the number of holes and the material.
NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
ONE HOLE STAINLESS - 790DD-000
ONE HOLE BRASS - 799DD-00
10 79010 79910
22 79022 79922
30 79030 79930
40 79040 79940
3 HOLE STAINLESS - 750DD-000
3 HOLE BRASS - 759DD-000
10 75010 75910
22 75022 75922
30 75030 75930
40 75040 75940
4 HOLE STAINLESS - 760DD-000
4 HOLE BRASS - 769DD-00
10 76010 76910
22 76022 76922
30 76030 76930
40 76040 76940
5 HOLE STAINLESS - 770DD-000
5 HOLE BRASS - 779DD-000
10 77010 77910
22 77022 77922
30 77030 77930
40 77040 77940
6 HOLE STAINLESS - 780DD-000
6 HOLE BRASS - 789DD-00
10 78010 78910
22 78022 78922
30 78030 78930
40 78040 78940


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
 Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.