MULTIPLE ORIFICE, RADIAL PATTERN, MEDIUM LENGTH, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 89010-012. To specify angles not listed, use the basic part number shown, replacing the "D" digits for the included angles desired. Following this, add a dash and the orifice size. The basic number gives both the number of holes and the material.
NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
ONE HOLE STAINLESS - 890DD-000
ONE HOLE BRASS - 899DD-00
10 89010 89910
22 89022 89922
30 89030 89930
40 89040 89940
3 HOLE STAINLESS - 850DD-000
3 HOLE BRASS - 859DD-000
10 85010 85910
22 85022 85922
30 85030 85930
40 85040 85940
4 HOLE STAINLESS - 860DD-000
4 HOLE BRASS - 869DD-00
10 86010 86910
22 86022 86922
30 86030 86930
40 86040 86940
5 HOLE STAINLESS - 870DD-000
5 HOLE BRASS - 879DD-000
10 87010 87910
22 87022 87922
30 87030 87930
40 87040 87940
6 HOLE STAINLESS - 880DD-000
6 HOLE BRASS - 889DD-00
10 88010 88910
22 88022 88922
30 88030 88930
40 88040 88940


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
 Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.