MULTIPLE ORIFICE, RADIAL PATTERN, LARGE DIAMETER, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 29010-012. To specify angles not listed, use the basic part number shown, replacing the "D" digits for the included angles desired. Following this, add a dash and the orifice size. The basic number gives both the number of holes and the material.
NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
ONE HOLE STAINLESS - 290DD-000
ONE HOLE BRASS - 299DD-00
10 29010 29910
22 29022 29922
30 29030 29930
40 29040 29940
3 HOLE STAINLESS - 250DD-000
3 HOLE BRASS - 259DD-000
10 25010 25910
22 25022 25922
30 25030 25930
40 25040 25940
4 HOLE STAINLESS - 260DD-000
4 HOLE BRASS - 269DD-00
10 26010 26910
22 26022 26922
30 26030 26930
40 26040 26940
5 HOLE STAINLESS - 270DD-000
5 HOLE BRASS - 279DD-000
10 27010 27910
22 27022 27922
30 27030 27930
40 27040 27940
6 HOLE STAINLESS - 280DD-000
6 HOLE BRASS - 289DD-00
10 28010 28910
22 28022 28922
30 28030 28930
40 28040 28940


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
 Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.