MULTIPLE ORIFICE, INLINE PATTERN, LARGE DIAMETER, SMALL BASE, DOMED NOZZLES:
Part number must be followed by orifice size desired, such as 20022-010. To specify angles not listed, use the basic part number shown, replacing the AA/BB/CC digits for the included angles desired. Following this, add a dash and orifice size. The basic number gives both the number of holes and the material.
NOZZLE TYPE AND DESCRIPTION AA/BB/CC S.S. P/N BRASS P/N
2 HOLE STAINLESS - 200AA-000
2 HOLE BRASS - 209AA-00
22 20022 20920
30 20030 20930
45 20045 20945
60 20060 20960
3 HOLE STAINLESS - 210AA-000
3 HOLE BRASS - 219AA-000
22 21022 21921
30 21030 21930
45 21045 21945
60 21060 21960
4 HOLE STAINLESS - 220AABB-000
4 HOLE BRASS - 229AABB-000
35/76 2203576 2293576
30/60 2203060 2293060
25/50 2202550 2292550
5 HOLE STAINLESS - 230AABB-000
5 HOLE BRASS - 239AABB-000
35/76 2303576 2393576
30/60 2303060 2393060
25/50 2302550 2392550
6 HOLE STAINLESS - 240AABBCC-000
6 HOLE BRASS - 249AABBCC-000
18/45/70 240184570 249184570
08/24/40 240082440 249082440


NOZZLETECH INC., 3208C EAST COLONIAL DR., ORLANDO, FL.,32803
1-800-544-2969 1-407-839-1500
 Fax 1-407-426-2025
Copyright NOZZLETECH, INC. 1998, 2004 all rights reserved.